ERDDAP
Easier access to the Amundsen Science data
Easier access to the Amundsen Science data
| griddap | Subset | tabledap | Make A Graph | wms | files | Title | Summary | FGDC | ISO 19115 | Info | Background Info | RSS | Institution | Dataset ID | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen11923.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen11923 | https://erddap.amundsenscience.com/erddap/tabledap/amundsen11923.graph | https://erddap.amundsenscience.com/erddap/files/amundsen11923/ | ArcticNet 1103a - Beaufort Sea CTD data | The CTD data was obtained during the 2011 ArcticNet scientific cruise #1103a.\r\n\r\nThe data were collected from September 26 to October 3, 2011, aboard the CCGS Amundsen. There were 35 casts associated to 27 stations, located in Baffin Bay and the Northwest Passage.\r\n\r\nThe following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), fluorescence (Seapoint chlorophyll fluorometer), CDOM (Wetlabs FL(RT)D), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissometer), light intensity (PAR; LI-COR Biosciences) and surface light intensity (sPAR; LI-COR Biosciences).\r\n\r\nQuality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.\n\ncdm_data_type = Profile\nVARIABLES:\nplatform_name\nplatform_id (Platform WMO ID)\nfilename (Source File Name)\ncruise_name\ncruise_number\ncast_number\nstation\ntime (Initial Start Time, seconds since 1970-01-01T00:00:00Z)\nlatitude (Initial Latitude, degrees_north)\nlongitude (Initial Longitude, degrees_east)\nPRES (Sea Pressure, decibars)\ndepth (m)\nTE90 (Temperature (ITS-90), degC)\nPSAL (Practical Salinity, PSU)\nOXYM (Dissolved Oxygen, uM)\n... (9 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen11923_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen11923_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen11923/index.htmlTable | https://catalogue.hakai.org/dataset/ca-cioos_None
| https://erddap.amundsenscience.com/erddap/rss/amundsen11923.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen11923&showErrors=false&email= | ArcticNet | amundsen11923 | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen1496.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1496 | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1496.graph | https://erddap.amundsenscience.com/erddap/files/amundsen1496/ | CFL 0708 - Amundsen Gulf CTD data | The CTD data was obtained during the 2007-2008 scientific cruise #0708 within the framework of the Circumpolar Flaw Lead Study (CFL). This program included a year round sampling expedition to study the air-sea interactions occurring in the ice-free sections of the southern Beaufort Sea and Amundsen Gulf.\r\n\r\nThe data were collected from December 22, 2007, to January 30, 2008, aboard the CCGS Amundsen. There were 158 CTD casts, associated to 10 ice-drift stations, located in the Amundsen Gulf area.\r\n\r\nThe following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), pH (Sea-Bird SBE-18-I), fluorescence (Seapoint chlorophyll fluorometer), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissometer), light intensity (PAR; Biospherical Instruments QCP2300) and surface light intensity (sPAR; Biospherical Instruments QCP2200). Quality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.\n\ncdm_data_type = Profile\nVARIABLES:\nplatform_name\nplatform_id (Platform WMO ID)\nfilename (Source File Name)\ncruise_name\ncruise_number\ncast_number\nstation\ntime (Initial Start Time, seconds since 1970-01-01T00:00:00Z)\nlatitude (Initial Latitude, degrees_north)\nlongitude (Initial Longitude, degrees_east)\nPRES (Sea Pressure, decibars)\ndepth (m)\nTE90 (Temperature (ITS-90), degC)\n... (11 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen1496_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen1496_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen1496/index.htmlTable | https://catalogue.hakai.org/dataset/ca-cioos_None
| https://erddap.amundsenscience.com/erddap/rss/amundsen1496.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen1496&showErrors=false&email= | ArcticNet | amundsen1496 | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen1497.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1497 | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1497.graph | https://erddap.amundsenscience.com/erddap/files/amundsen1497/ | CFL 0801 - Amundsen Gulf CTD data | The CTD data was obtained during the 2007-2008 scientific cruise #0801 within the framework of the Circumpolar Flaw Lead Study (CFL). This program included a year round sampling expedition to study the air-sea interactions occurring in the ice-free sections of the southern Beaufort Sea and Amundsen Gulf.\r\n\r\nThe data were collected from February 2 to March 13, 2008, aboard the CCGS Amundsen. There were 139 CTD casts, associated to 10 ice-drift stations, located in the Amundsen Gulf area.\r\n\r\nThe following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), pH (Sea-Bird SBE-18-I), fluorescence (Seapoint chlorophyll fluorometer), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissometer), light intensity (PAR; Biospherical Instruments QCP2300) and surface light intensity (sPAR; Biospherical Instruments QCP2200). Quality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.\n\ncdm_data_type = Profile\nVARIABLES:\nplatform_name\nplatform_id (Platform WMO ID)\nfilename (Source File Name)\ncruise_name\ncruise_number\ncast_number\nstation\ntime (Initial Start Time, seconds since 1970-01-01T00:00:00Z)\nlatitude (Initial Latitude, degrees_north)\nlongitude (Initial Longitude, degrees_east)\nPRES (Sea Pressure, decibars)\ndepth (m)\nTE90 (Temperature (ITS-90), degC)\n... (11 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen1497_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen1497_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen1497/index.htmlTable | https://catalogue.hakai.org/dataset/ca-cioos_None
| https://erddap.amundsenscience.com/erddap/rss/amundsen1497.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen1497&showErrors=false&email= | ArcticNet | amundsen1497 | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen1498.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1498 | https://erddap.amundsenscience.com/erddap/tabledap/amundsen1498.graph | https://erddap.amundsenscience.com/erddap/files/amundsen1498/ | CFL 0802 - Amundsen Gulf CTD data | The CTD data was obtained during the 2007-2008 scientific cruise #0802 within the framework of the Circumpolar Flaw Lead Study (CFL). This program included a year round sampling expedition to study the air-sea interactions occurring in the ice-free sections of the southern Beaufort Sea and Amundsen Gulf.\r\n\r\nThe data were collected from March 15 to April 23, 2008, aboard the CCGS Amundsen. There were 132 CTD casts, associated to 10 ice-drift stations, located in the Amundsen Gulf area.\r\n\r\nThe following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), pH (Sea-Bird SBE-18-I), fluorescence (Seapoint chlorophyll fluorometer), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissometer), light intensity (PAR; Biospherical Instruments QCP2300) and surface light intensity (sPAR; Biospherical Instruments QCP2200). Quality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.\n\ncdm_data_type = Profile\nVARIABLES:\nplatform_name\nplatform_id (Platform WMO ID)\nfilename (Source File Name)\ncruise_name\ncruise_number\ncast_number\nstation\ntime (Initial Start Time, seconds since 1970-01-01T00:00:00Z)\nlatitude (Initial Latitude, degrees_north)\nlongitude (Initial Longitude, degrees_east)\nPRES (Sea Pressure, decibars)\ndepth (m)\nTE90 (Temperature (ITS-90), degC)\n... (11 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen1498_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen1498_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen1498/index.htmlTable | https://catalogue.hakai.org/dataset/ca-cioos_None
| https://erddap.amundsenscience.com/erddap/rss/amundsen1498.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen1498&showErrors=false&email= | ArcticNet | amundsen1498 | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_acm.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_acm | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_acm.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_acm/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (45 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_acm_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_acm_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_acm/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_acm.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_acm&showErrors=false&email= | ArcticNet | amundsen13109_acm | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_adcp.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_adcp | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_adcp.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_adcp/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeriesProfile\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (33 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_adcp_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_adcp_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_adcp/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_adcp.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_adcp&showErrors=false&email= | ArcticNet | amundsen13109_adcp | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_clw.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_clw | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_clw.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_clw/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (19 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_clw_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_clw_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_clw/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_clw.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_clw&showErrors=false&email= | ArcticNet | amundsen13109_clw | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_compact_lw.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_compact_lw | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_compact_lw.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_compact_lw/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (12 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_compact_lw_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_compact_lw_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_compact_lw/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_compact_lw.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_compact_lw&showErrors=false&email= | ArcticNet | amundsen13109_compact_lw | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ctd.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ctd | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ctd.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_ctd/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (26 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_ctd_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_ctd_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_ctd/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_ctd.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_ctd&showErrors=false&email= | ArcticNet | amundsen13109_ctd | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_da.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_da | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_da.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_da/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (66 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_da_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_da_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_da/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_da.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_da&showErrors=false&email= | ArcticNet | amundsen13109_da | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ips5.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ips5 | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_ips5.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_ips5/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (24 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_ips5_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_ips5_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_ips5/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_ips5.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_ips5&showErrors=false&email= | ArcticNet | amundsen13109_ips5 | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_mmp.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_mmp | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_mmp.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_mmp/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (21 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_mmp_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_mmp_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_mmp/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_mmp.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_mmp&showErrors=false&email= | ArcticNet | amundsen13109_mmp | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_rcm.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_rcm | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_rcm.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_rcm/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (26 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_rcm_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_rcm_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_rcm/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_rcm.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_rcm&showErrors=false&email= | ArcticNet | amundsen13109_rcm | ||
| https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_svn.subset | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_svn | https://erddap.amundsenscience.com/erddap/tabledap/amundsen13109_svn.graph | https://erddap.amundsenscience.com/erddap/files/amundsen13109_svn/ | Long-term oceanic observatories moorings data in the Beaufort Sea during ArcticNet study 2004-2010, reprocessed. | Thirty-six moorings were deployed in the Beaufort Sea between 2004 and 2010. Some of the moorings were deployed for one year only and others were maintained (recovered and redeployed) over several years. A total of 12 moorings were lost (1 in 2004, 2 in 2006, 1 in 2007, 2 in 2008, and 6 in 2010). Mooring sites included the Mackenzie Shelf (North-Western to North-Eastern), Mackenzie Shelf slope, Kugmallit Valley, Canada Basin, Mackenzie Canyon, Amundsen Gulf (West to East), and outer Franklin Bay area. Bottom depth at deployment sites varied between 200 and 545 m. Mooring lines were equipped with various oceanographic instruments attached at different depths from 12 m to a maximum of 500 m below the surface. Moored instruments included ALEC conductivity-temperature-turbidity- chlorophyll-PAR sensors, SeaBird SB 26 and SB37 conductivity-temperature sensors, RMC4, RMC7 and RCM11 current meters, Nortek current profilers, McLane moored profilers and NIPR and Technicap sediment traps. The datasets available were quality controlled, and have been used in several publications listed in the document accompanying the data. Variables available include water temperature, conductivity (salinity), density, PAR, Chla, turbidity, oxygen and current velocity (speed and direction). Sediment trap collections were used to estimate downward fluxes of particles, and datasets are described in Metadata CCIN 10476 (Vertical particle flux data in the Beaufort Sea: 2002-2010).\nThis dataset is a reprocessed version of the previous one. The processing chain used is built upon open-source Integrated Marine Observatory System (IMOS) toolbox developed for Matlab© by the Australian Ocean Data Network (AODN; Galibert, 2016).\n\ncdm_data_type = TimeSeries\nVARIABLES:\nfilename (Source File Name)\nplatform_code\nproject\nsite_code\nsite_depth_at_deployment\nsite_nominal_depth\ndeployment_code\ninstrument\ninstrument_serial_number\n... (38 more variables)\n | https://erddap.amundsenscience.com/erddap/metadata/fgdc/xml/amundsen13109_svn_fgdc.xml | https://erddap.amundsenscience.com/erddap/metadata/iso19115/xml/amundsen13109_svn_iso19115.xml | https://erddap.amundsenscience.com/erddap/info/amundsen13109_svn/index.htmlTable | ??? | https://erddap.amundsenscience.com/erddap/rss/amundsen13109_svn.rss | https://erddap.amundsenscience.com/erddap/subscriptions/add.html?datasetID=amundsen13109_svn&showErrors=false&email= | ArcticNet | amundsen13109_svn |